Advertisements

Here is a complete tutorial on how to jailbreak iOS 6.1.3 for all A4 devices and pre-A4, including iPhone 3GS, iPhone 4 and iPod touch 4G with Sn0wbreeze version 2.9.14. So go ahead and read more about how to jailbreak iOS 6.1.3 using Sn0wbreeze 2.9.14

ios 6.1.3 pwned Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]
As you know that iOS 6.1.3 was released by Apple before iOS 6.1.4, so the Apple patched Evasi0n iOS 6.1.x untethered jailbreak. And with the help of Geohot’s popular Limera1n exploit, all devices running with A4 chip on iOS 6 can be jailbroken. In the previous articles some days ago we’ve told you about how to jailbreak iOS 6.1.3 using RedSn0w and now we tell you about how to do it using Sn0wbreeze 2.9.14

Advertisements

How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9 4 Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]

Let start the process and know about requirements.

Supported Devices:

  • iPhone 3GS
  • iPhone 4
  • iPod Touch 4G

What are the Requirements:

  • A Pre-A4 iOS Device.
  • The latest version of Sn0wbreeze. [Download link]
  • A 30 Pin USB cable to plug your device to computer.
  • Download iOS 6.1.3 for your device]
  • Windows 8 must have .NET Framework 3.5 installed to run Sn0wbreeze. [Download link]

Direct Download Links To Download iOS 6.1.3

Notice: As we’ve described above, that only A4 or some older devices are compatible, it means that if you have an iPhone 5 / 4S or the latest 5th generation iPod touch running iOS 6.1.3 and then you are lucky. As this is a tethered jailbreak, you have to connect the device to the PC and boot tethered with iBooty every time you restart the device.

Everything is set? Let’s start.

Here is How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9.14:

Step No. 1: First of all you have to download the latest version of Sn0wbreeze v2.9.14. You can download Sn0wbreeze v2.9.14 from the given download link above. Also download the iOS 6.1.3 firmware accordingly for your device.

How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9 1 Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]
Step No. 2: Now open Sn0wbreeze, and click on the blue arrow on the bottom right side.

Step No. 3: Here just browse for an IPSW file and choose the firmware file you downloaded in Step No. 2 i.e iOS 6.1.3 IPSW file.

Step No. 4: When the firmware has been verified, click on the next arrow again, and from the next screen, choose Simple Mode.

How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9 2 Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]

A message will display here that if you want to active your iPhone?, click on “Yes”, if you plan to unlock your phone using tools such as Ultrasn0w. Select “No” if you are on an official supported carrier, or if you have a factory unlocked iPhone.

Step No. 5: Here, Sn0wbreeze will start baking the custom iOS firmware file and it will have some time to complete.

Step No. 6: Once the process is done, it will generate a custom IPSW firmware file and that new custom firmware will be placed on your desktop.

How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9 3 Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]

Step No. 7: After successfully getting new custom file, Sn0wbreeze will now ask for entering in Pwned DFU mode. So on the screen instructions will let you know that how to enter in Pwned DFU mode. It is possible that you might not get the procedure right in the first go, so you might be forced to give it another try. Don’t be alarmed if it happens, and keep trying till you get it right.

How To Jailbreak iOS 6.1.3 Using Sn0wbreeze 2.9 5 Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]
Step No. 8: Now in Pwned DFU mode, open iTunes, and keep your device plugged in to your computer.

Step No. 9: Now iTunes will detect device in recovery mode. On keyboard just hold down the left SHIFT key and click on Restore. Now Select the custom firmware file from the desktop.

Step No. 10: Now let your device restore, this process may take some time.

Step No. 11: Once the process has been completed, your device will boot with Cydia installed.

Booting Tethered:

iBooty 2.3 to Jailbreak Step By Step Guide   How To Jailbreak iOS 6.1.3 A4 / Pre A4 Devices Using Sn0wbreeze 2.9.14 [Download Links]
This is a tethered jailbreak, and as a part of this process, Sn0wbreeze will create a new folder for a utility called iBooty on the desktop of your computer. Here are step by step instructions on how to boot device into the jailbroken state with working Cydia:

Step No. 1: Open iBooty.

Step No. 2: Now choose your device from the drop down menu, and click on the Start button from within the iBooty, and follow on screen instructions about putting device in DFU mode.

Step No. 3: Once iBooty is done, your device will boot up and now you are all set to install applications and tweaks from Cydia.

Advertisements

Tags: , , , , , , , , , , , ,

ABOUT THE AUTHOR:

Founder of iPho9.Com. Technology Enthusiast & Student Of MIT, Eager to Write on Blogging, Technology, Gaming, Apps Reviews and Gadgets.

1 Comment on this article. Feel free to join this conversation.

  1. Sage June 19, 2013 at 2:09 am -

    This software is useless, my ipod got stuck halfway through the install (with the progress bar under the sn0wbreeze image) and i had to restore my ipod.

Leave A Response